Contato: +1 (888) 800-9580

Resetting an X-Rite 390/391

On occasion a customer wishes to simply clear instrument memory and start over from scratch. While not documented in X-Rite operation manuals this is possible. In fact, with the '90' series there are two reset options. A "Field Reset" and a "Master Reset". The field reset will clear stored data without loss of instrument configuration settings. The master clears all memory and re-establishes X-Rite factory default settings. To do either a field or a master reset proceed as follows:

  1. Wake the unit and allow its self-test to complete.
     
  2. From the "MAIN MENU" press the left-hand key until it reads "p3".
     
  3. Next, simultaneously press keys 1 and 3 (the first and third keys).

    The instrument will now display "MASTER RESET?". On the second line of the display are the words "field      yes no".
     
  4. To perform a field reset press the left-hand key (beneath the word "field").

    If a full master reset is desired press the third key (beneath the word "yes").

    The unit will respond in either case by indicating that a reset is in progress. At the conclusion of the reset, the unit will return to normal operation on "p3".
     
  5. To return to the "MAIN MENU" press the two right-hand keys at the same time.


 

Note: The customer will lose ALL information currently stored in the device. This procedure should only be performed if the desire is to completely wipe the unit of all previous information.

Dúvidas? Precisa de um orçamento? Contato. (888) 800-9580