Configuration following a Reset - 500 Series
The following table lists the operational status of a 500 series instrument following a reset. The data listed is specific to the 530. All other models are a subset of this unit. If you operate another of the 500 series instrument family (eg., 508) then certain of table's values do not apply.
BAUD RATE 9600 HAND SHAKING None PROTOCOLS RCI ECHO SETTINGS None BEEPER TONE High DELIMITER Carriage Return and Line Feed (CRLF) SEPARATOR Comma POWER DOWN TIME 120 seconds DECIMAL PRECISION 2 SHOW DECIMAL YES SHOW DATA LABELS N0 AUTO TRANSMIT OFF ECHO SETTINGS OFF PATCH SMARTS ON ORIENTATION Left Handed POLARIZATION OFF DENSITY FUNCTION Enabled DOT FUNCTION Enabled COLOR FUNCTION Enabled TRAP FUNCTION Enabled PRINT CONTRAST FUNCTION Enabled HUE GRAYNESS FUNCTION Enabled PAPER INDICES FUNCTION Enabled COMPARE FUNCTION Enabled EFS FUNCTION Enabled CONFIGURATION Enabled CALIBRATION ALERT Enabled TIME FORMAT 12 hour DATE FORMAT MM/DD/YY DECIMAL SEPERATOR Period LOCALE English LAB METHOD CIE LCH METHOD LCh(ab) COLOR PRECISION x10 DENSITY PRECISION LOW DENSITY NEWS OFF DENSITY REFERENCE MODE Auto DENSITY REFERENCE SEQUENCE Sequential NEWS DENSITY 3 COLOR VS BALANCE 3 COLOR DENSITY COLOR SELECTION Auto COLOR METRIC Lab COLOR REFERENCE SELECTION MODE Auto COLOR REFERENCE SEQUENCE Sequential DOT REFERENCE #1 25.0; ENABLED DOT REFERENCE #2 50.0; ENABLED DOT REFERENCE #3 75.0; ENABLED N-FACTOR 1.000 N-FACTOR MODE Disabled DOT COLOR SELECTION Auto DOT GAIN Disabled TRAP FORMULA Preucil TRAP REFERENCE Disabled PRINT CONTRAST REFERENCE Disabled PRINT CONTRAST COLOR SELECTION Auto EFS OVERPRINT MODE Trap EFS REF 3 MODE Dot DENSITY STATUS T ILLUMINANT OBSERVER D50/2 DE METHOD DeltaE L*a*b* MINUS PAPER Disabled
