Instrument Settings following a factory reset (SP60, SP62, SP64)

A factory reset will restore the following defaults to the SP60, SP62, SP64 instruments:

Language - English
Measure Options…
- Store Samples - Off
- Pass/Fail - Off
- Auto Std - On
- Averaging - 1
- Diff Display - Off
Color Options
- Active Functions… - L*a*b*, L*C*h, and dEcmc
- Active Illum/Obs… - A/10, D65/10, and F2/10
- Opacity Menu
  - Data Display - Color
  - SPIN k1 - 0.04
  - SPIN k2 - 0.60
  - SPEX k1 - 0.00
  - SPEX k2 - 0.60
- Strength Options
  - Method - Apparent
  - Predicted - @ 100%
- Metamerism Menu
  - Mode - MI (not the DIN method)
  - Ill/Obs1 - D65/10
  - Ill/Obs2 - F2/10
- dEcmc Factors
  - Lightness - 2.00
  - Chromaticity - 1.00
- dE94 Factors
  - Lightness - 2.00
  - Chromaticity - 1.00
- Shade Sort - Off
- SP88 SPEX Mode - Off
Database Tools
- View Tags
  - In View Tag screen, should be there as all tags were deleted.
Hardware Settings
- Serial Port Options
  - Baud Rate - 9600
  - Handshake - Off
  - Auto XMT - Off
  - Separator - Comma
  - Delimiter - CRLF
  - Set Data Types… - Only SPIN Colorimetric should be active
  - Header - On
  - Std Printout - On
  - Emulation - Off
- Read Operation - Switch Only (meaning the switch activated by the foot/shoe)
- Cal Timeout - 24 hrs
- Power Down - 120 sec
- Beeper - Loud
- Clock Adjustments
  - Date Format - M/D/Y
  - The actual time readings are not affected by factory presets
- Display
  - Contrast - 52
  - Orientation - Right
  - Security - Off
  - Error Log… - does not get cleared out, should hopefully be

All of the preceding items can be manually edited via the instrument's "Configuration Menu". The following also occurs:

All databases will be cleared out, this includes all Samples, Standards, Projects, strings, tags, and jobs.
L*a*b*, D65/10 and SPIN will all the default selects in QA/Analyze…etc
Reflectances stored from the last measurement will all be 0's.
Calibration will be required before any measurements can be done.
Upon Calibration for the first time after a reset, the black cal will most likely complain about dust, and require a second reading.

Things that will never change due to the Factory Presets being loaded: