Configuring Tool Crib to Connect to a VeriColor Spectro
- Launch Tool Crib and select "Generic" from the instrument list.
- Click on "GO".
![Generic](http://www.xrite.com/-/media/XRite/Images/Apps_FAQs/t/ToolCrib_01.jpg)
- Set the Instrument connection parameters to:
- RCI,
- Serial,
- The correct com port (the com port being used to physically connect the Hub Solo or Spectro to the PC),
- Set the Baud Rate to 115,200 for VeriColor Spectro and click "Connect".
![RCI](http://www.xrite.com/-/media/XRite/Images/Apps_FAQs/t/ToolCrib_02.jpg)
- The following screen will appear and you will be ready to test your connection.
![Connect](http://www.xrite.com/-/media/XRite/Images/Apps_FAQs/t/ToolCrib_05.jpg)