5 Things That Could Go Wrong Without an Automotive Spectrophotometer An automotive spectrophotometer is a critical tool in the automotive industry, especially when it comes to automotive color control. These advanced devices ensure that paint colors are precisely matched, consistently applied, and meet the required standards for automotive finishes. Without an automotive spectrophotometer, several issues can arise that impact the quality, efficiency, and overall satisfaction of vehicle paint jo...

The Future of Color Consistency: LED Lighting Solutions for Industry Standards For years, fluorescent bulbs have been a mainstay in industries requiring accurate color assessment, but their downsides are becoming increasingly hard to ignore. These lights require warm-up time and may distort color accuracy, both of which lead to production delays and translate into higher sample costs. More importantly, fluorescent bulbs contain hazardous materials like mercury, complicating their disposal. Thi...

Why Backward Compatibility in Spectrophotometers Is Key to Consistent Color If you’re here, chances are you rely on a benchtop spectrophotometer to keep your color quality on point. From textiles and plastics to paint, coatings, and more, these high-precision instruments are critical to maintain consistency in your processes. At X-Rite, we engineer our spectrophotometers to perform reliably for years, even in the toughest environments. But no instrument lasts forever, and eventually, an ...

Looking for a centralized location to manage your X-Rite products and services? Check out My X-Rite. Whether you need product information or support, service details, or access to learning resources, our free online portal is just a few clicks away. 24/7 Access: Easily access your personal dashboard from your computer or mobile device around the clock. Personalized Dashboard: See what matters most to you in one convenient location. Effortless Service & Support: Submit and track...

A recent amendment to the EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment will remove the current exemption for mercury to be used in a number of types of fluorescent lamps for special purposes by 24th of February 2025. These bulbs are defined under clause 2(b)(4)-I of the EU REACH directive. After the expiration date, the sale of new equipment including fluorescent technology under this exemption will not be allowed in Europe. Th...

Enhancing Automotive Aesthetics with Automotive Color Match In today's fast-paced automotive industry where innovation is the driving force, the demand for precision and perfection has never been higher. Automotive designers and manufacturers are constantly seeking ways to enhance vehicle aesthetics, while parts manufacturers and refinishers strive to match color and appearance between parts and across sites. The Significance of Automotive Color Matching The right automotive paint color not onl...

Does your quality control program include visual evaluation? If not, it should. Using the SpectraLight QC as part of a color evaluation workflow. No matter your industry, judging color is more than just measuring samples with a color measurement device. Just because a spectrophotometer says your color is within tolerance, doesn’t necessarily mean it will look right to the human eye. To minimize customer rejects, your color control process needs to include visual evaluation in a light boo...

This time of year, the internet is full of Top 10 Countdowns. It’s a tradition we’ve embraced since 1940 when the Billboard published its first chart ranking the top selling recorded songs. Since then, others have jumped on the bandwagon to highlight the most popular trends of the previous year.   We’ve been publishing our top-read blogs since 2016, and we’re happy to see some educational topics like color perception, tolerancing, and spectrophotometers continue to r...

Why Calibrate Your Spectrophotometer? For the most part, today’s color measurement instruments are 100% digital. In fact, there are very few analog components inside, except for the light bulbs. Although they’re more stable than their analog predecessors, their tolerances are much narrower, and they need regular spectrophotometer calibration to stay within these tight specs. Bulb Stability As you use your instrument and the bulb turns on and off, it starts to change its character. S...

You say color is important, but do you know why it’s so important? In reality, color is a critical element in the manufacturing process. Unfortunately, many manufacturers are realizing that getting color right is much harder than it used to be, and the brands they support are asking them to meet tighter tolerances. Here’s why. While advances in color technology – think metallic packaging, pearlescent finishes, custom fabrics and vibrant new colors – entice customers, the...

When customers are just getting started with color management, they often ask, "What is the difference between a spectrometer and a spectrophotometer?". With such a minute spelling difference, it's easy to make a quick typo and get the wrong answer for this color question. So...what's the difference? Spectrometers vs. Spectrophotometers    What is a Spectrophotometer? A spectrophotometer is a color measurement device that is used to capture and evaluate color on just about anything, in...

In this series we’ve been discussing the many factors that impact how we see color, and what we can do to ensure the color we see is accurate. Light, retinal fatigue and background effects can influence our perception of color. Today we’ll look at the limitations of the human eye and brain, and talk about how to detect these characteristics, especially for individuals responsible for evaluating and judging color. Are YOU color deficient? Read on to find out. (Spoiler alert: There’s a test at the...

There are many things that affect our ability to see color. In some cases, it doesn’t matter if the red you see is the same shade I see. A barn is a barn, right? But for those who work in an industry where color evaluation is part of the job, it IS important… VERY important. In our color perception series, we’re discussing the many factors that affect how we see color and what colorists can do to ensure that the color they see is the color they are supposed to see. Today we’ll take a closer look...

As the temperature of light changes, so does our perception of color. As I mentioned in our last post, light plays a huge role in the way we perceive color. Today we’ll look at the science of color in manufacturing and photography; specifically how an object’s reflective and absorptive properties and viewing technology can impact the colors we perceive. To reflect or not to reflect… that is the question. The colors an object absorbs and reflects is determined by its material – is it metal, plas...

According to autolist.com, over 80% of cars produced today are white, black, or some shade of gray. It’s not necessarily because bright and bold colors are more difficult to produce and match than their grayscale counterparts, they just take longer to get through the inspiration and car design process.  Believe it or not, producing a new auto color can take up to five years before it makes it to the showroom floor. It’s a long, tedious process for designers, paint...

Color measurement is used to specify, quantify, communicate, formulate, and verify color quality for color critical work. Because everyone perceives color differently, color measurement is more precise than visual evaluation.  How to Measure Color Wavelength To measure color, a color measurement device called a spectrophotometer shines light onto a sample and captures the amount of light that is transmitted or reflected in the 380 nm to 780 nm wavelength range, which is the wavelength rang...

2020 forced manufacturers to rethink the way they work. Around the globe, COVID put a hard stop on the travel required to approve prototypes and delayed the shipment of physical samples. Many brands started looking for ways to use digital color samples to keep production moving but struggled with the inability to replicate how a color sample would look on a prototype. The PANTORA desktop application closes this gap. With PANTORA, users can capture or import spectral samples and store, manage, vi...

To establish a successful quality control program, you need good instrumentation, robust software, and trained users. But even with everything in place, there are some common pitfalls to watch for when using a spectrophotometer to analyze color quality. Measuring plastic parts with the X-Rite Ci7800 benchtop spectrophotometer. Top Five Color Measurement Pitfalls  1. Bad Standards and Samples Physical standards and samples don’t last forever. Careless handling and dirty devices can ...

Whether you’re producing textiles, automotive parts, or plastic pieces, color needs to remain consistent or the final product will be rejected. Unfortunately, there are many ways for color errors to creep in during manufacturing. Creating and using accurate digital color standards is one way to combat these errors. Digital color standards can be used in software to specify and communicate color, formulate colorants and raw materials, and control color quality. They give brand owners peac...

Whether you work with plastics, coatings or textiles, you must consistently achieve in-tolerance color or your product could be rejected before it even makes it to the shelf or showroom.     This is especially true for brands that rely on off-site suppliers and manufacturers for raw materials and parts that come together at assembly, such as the plastic dashboard, fabric seats, and coated interior panels of a car. Even if each site produces in-tolerance color, it must be monitored an...

Durable goods and consumer electronics are no longer destined to be white, gray, and black. In fact, consumers are moving towards more classic colors and special effect finishes like metallics. To capitalize on this trend, brands need to bring innovative designs in new colors faster to market than ever before.   One trending color, the PANTONE Color of the Year 2020, is sure to capture the attention of durable good and consumer electronic brands. It is a simple, timeless, elegant, and endur...

Inline Color Measurement for the Paper, Textile, Plastics, Coil Coating, and Glass Industries X-Rite’s inline color measurement solutions enable manufacturers in a variety of industries to evaluate color accuracy and consistency throughout production and track ISO compliance. Inline systems monitor color while the product is being made and alert operators if it begins to move out-of-spec so corrections can be made before the product is wasted. The ERX145 spectrophotometer mounted on a t...

Virtual reality has re-imagined the art of apparel and footwear design. 3D design programs like MODO, KeyShot, CLO, Browzwear, Optitex, and Lectra augment the creativity of color and material designers to virtually construct patterns and render realistic 3D garments.  This is exciting technology for brands that want to reduce waste for a greener footprint and accelerate design to keep up with fast fashion. However, designers are notoriously tactile. They need to touch, feel, and gain a...

Colorimeters and spectrophotometers are color measurement devices that are used to capture, communicate, and evaluate color. From cardboard packaging to food, laundry soap, carpeting and small plastic parts, color measurement devices help ensure the color being produced matches the color that was originally specified. They’re used behind the scenes in just about every industry where color is important, including plastics, textiles, paints, coatings, print and packaging. There are basicall...

Inter-instrument agreement is a very important consideration when selecting color measurement devices for your workflow. Unfortunately, it’s such a technical topic that it leads to a lot of confusion about what it means and why it’s important. The Ci7860 sphere benchtop spectrophotomter is has an inter-instrument agreement specification of 0.06 average Delta E*, enabling brands to create the most precise master color standards. Today we’re making it as simple as possibl...

Your customer rejected your latest shipment due to color.  You checked the color before you sent it and it passed tolerance…  You did everything the same way last time and it passed tolerance…  So why did it get rejected now? We get this question from our customers all the time.  The Dreaded “Error Stack” Color rejections create waste and increase production costs. Unfortunately, there are a lot of variables that contribute to the color you produce,...

For the last few Decembers, we’ve provided you with a list of “top color measurement blogs” for that respective year. As we reviewed this year’s list, we noticed that your favorite/ the most-read blogs could be categorized into a few buckets. So, without further ado, here’s 2018’s top blog topics!  2018’s Most Popular Color Measurement Topic: Tolerancing Not to our team’s surprise, Tolerancing – what it is/what it means for your busines...

Each year, Pantone announces its highly anticipated “Color of the Year”. The selection is intended to serve as a strategic direction for design and color-conscious industries as well as a conversation piece around our culture, where it is going and what we collectively need…and it certainly gets everyone talking about color!  Color is no longer just something we see and appreciate - it enhances and influences the way we experience life. Color, as a strategic element of d...

Like geographic coordinates – longitude, latitude, and altitude – L*a*b* color values give us a way to locate and communicate colors. What’s the history of L*a*b*? In the 1940’s, Richard Hunter introduced a tri-stimulus model, Lab, which is scaled to achieve near uniform spacing of perceived color differences. While Hunter’s Lab was adopted as the de facto model for plotting absolute color coordinates and differences between colors, it was never formally accepted as...

Warm weather is just around the corner and spring is in the air!   Fluffy yellow chicks…   Delicate pink tulips…   Soft green sprouts poking through the ground…   And, of course, spring M&M'S®! Advertisers target our springtime emotions through pastel colors. Pastels have a calming effect, and everywhere you look companies are using them to feed our desire to feel a bit of spring. Today we’ll take a look at the psychology of color, how marke...

Recently we blogged about how appearance affects color. In this article we look at some of the characteristics that impact an object’s appearance, such as texture, gloss, transparency, and special effects, and explain why it’s crucial to describe appearance in the early stages of the design workflow.  While 3D programs have attempted to address appearance aspects for years, there has been a missing link in virtual product design: the ability to integrate characteristically &ldqu...

Whether purchasing a new car, consumer electronics, or household appliances, color consistency influences the perception of quality. If the color doesn’t match from front-to-back and side-to-side, customers will likely question the quality and move on. That’s where color measurement can help. In today’s competitive marketplace, manufacturers are going beyond color to utilize extreme effect finishes to differentiate their products. But, as manufacturers are quickly learning, me...

Appearance is more than simply color. It’s a comprehensive look at everything inherent to each unique material we come in contact with, including texture, gloss, transparency, and special effects. Each of these characteristics plays a part and has an effect on overall appearance and understanding in relation to a single material. Objects may have several elements that affect appearance, such as the material’s surface texture, construction, overall geometry and micro-surface. The environ...

The World Series starts next week. While players and fans are gearing up for the big event, stadium groundskeepers are preparing, too. You’ve surely seen those meticulous patterns in the grass – crisscross, spiral, plaid – but do you know how the groundskeepers create them? Thanks to a phenomenon called geometric metamerism (aka gonio-appearance), the grass really is greener on the other side. Read on to learn more about this optical illusion that can trick your eyes and wreak havoc on y...

Color is our perception of reflected light across the visible spectrum. When light hits an object, it absorbs some rays and reflect others. The color of light that reflects back into our eyes is the color we perceive. The more light an object absorbs, the darker it appears. With black, very little light is reflected. Pure black in the presence of light wasn’t achieved until 2014 when Surrey NanoSystems announced the invention of Vantablack. This high-tech artificial substance absorbs 99....

We frequently get calls from customers who can’t figure out why their measurements vary, even when they’re using maintained devices. Why would a sample read one way one day, then slightly different another? Many times the culprit is thermochromaticity, and it becomes an even bigger problem as the seasons change. Every kind of material changes color with temperature. These changes cause the material to exhibit a shift in reflected wavelengths of light, which can alter our perception....

Have you ever sent out a job that passed your inspection, only to have the customer reject it for out-of-tolerance color? You recheck the data and the instrument says the color passed the agreed tolerance… why is the customer saying it doesn’t? We get a LOT of these conflicting measurement calls in technical support. The solution is simple – document a color control program that clearly defines how to assess color, then make sure everyone (including your customer) follow...

Did you read our blog: Are You Using The Right Tolerancing Method? If not, check it out. Today we’re taking the topic one step further to investigate how tolerances are chosen in different industries. A pass-fail tolerance is the amount of color variation that is considered commercially acceptable. In part, tolerances are driven by customer expectations. While color tolerances are very tight in the automotive, plastics, and paint & coatings worlds, they can be much less strict in other...

Consistent color is a journey. A few weeks ago I blogged about the most common pitfalls people run into when starting a color program… Wrong lighting Less-than-perfect color vision Inaccurate physical standards Inconsistent device color measurement …And introduced some inexpensive color tools to help overcome them.   But the journey doesn’t stop there. Even if you’ve been successfully managing color for years, advances in inks, dyes, and substrates are introducing new challen...

Our color measurement devices are used by designers, brand owners, formulators, printers, and manufacturers around the world. Ranging from portable handheld devices, to large benchtop instruments, to spectrophotometers mounted inline, they can measure just about anything to help formulate and maintain a perfect color match. Many of our customers, especially those in the paint industry, are asked to color match some pretty interesting things, and we love to hear about them. We recently asked 40 p...

It’s the most wonderful time of the year! A time to reminisce… to celebrate our successes, and to explore areas that may need a little more attention in 2017. If color accuracy is on your list of things to improve, this article is for you. We’ve compiled a list of the blogs our readers found most helpful and interesting in 2016, so you can start working toward your goal of more accurate color in the New Year. Did your favorite blog make the list? Top 10 X-Rite Blogs of 2016 ...

When judging color, background can be a major distraction for the human eye. In fact, surrounding colors and patterns can actually change the perception of the color you’re trying to focus on. One of the wonderful things about color measurement instruments like colorimeters and spectrophotometers is that they can’t be distracted. They aren’t susceptible to variables such as fatigue, age or color vision deficiency. They aren’t even aware that a surround exists – they...

Spectrophotometers are instruments that measure color. Manufacturers use them in every industry where accurate color is important, from paint and plastics to textiles, packaging, and even food. The data captured by spectros allow designers, brand owners, manufacturers, and quality control professionals to precisely communicate color and ensure it stays accurate throughout production. Sometimes I’m asked which color is the hardest to measure and control. Can you guess what it is? Overly s...

Tim Mouw is our Manager of Applications Engineering & Technical Support for the Americas. Tim is so knowledgeable about the impact of color in many industries, and his stories always intrigue us. Tim has authored many X-Rite Pantone blogs, including: What is metamerism, and why should you care? Effective ways to measure reflective surfaces What’s sabotaging your sustainability efforts? 5 color evaluation pitfalls to avoid Why is controlling color so hard? We recently sat down with him to...

Whether it’s using Munsell Color Standards or one of our many color measurement devices, X-Rite helps manufacturers around the world achieve accurate color. We talked to our support team to learn about some of the most interesting ways people have used our equipment to measure and control color. From archeologists to fur traders and gastroenterologists, here are a few of our favorites. In 2014, the city of Los Angeles used one of our handheld spectrophotometers to help remove more than 37 millio...

For many of us, fun in the sun can lead to a summertime tan. The science behind this sun + skin interaction is melanin, a skin pigment our body releases to block the UV rays found in sunlight. The more time we spend in the sun, the more melanin is released, and the darker (or more freckled) our skin becomes. This shift in skin tone doesn’t matter for most people, but for prosthetic wearers even a slight change can be a big deal. Here’s how Royal Preston hospital in the United Kingdom is using co...

When visually evaluating color, everyone accepts or rejects color matches based on their color perception skills. In manufacturing, this subjectivity can lead to confusion and frustration between customers, suppliers, vendors, production, and management. Are these acceptable color differences? This is why color measurement devices are important in so many industries. By measuring colors using a spectrophotometer, you can communicate and compare spectral data for exact results. To aid in color...

Beginning around the 1930s, the rules of fashion dictated no white before Memorial Day. It was a status symbol when the wealthy left their winter garments behind and headed to the beach for the summer with their lightweight, carefree clothes. Although the rule still loosely applies, modern-day fashion is more concerned with the brightness of your whites than when you start wearing them. So how do manufacturers ensure their products are as white as they can be? What are Optical Brightening Agents...

You’re at the grocery store, trying to choose a new snack. With so many brands on the shelf, how will you decide? If you’re like most consumers, you’ll probably reach for the most attractive package. Color and packaging play a leading role in brand success, and metallized substrates are more popular than ever. Consumers love them because they convey quality and offer additional strength and protection, but for printers, metallized substrates are expensive and make print color ...

Have you ever walked out of the house wearing two black socks, only to arrive at work and realize one of them is navy blue? If so, you’ve been a victim of metamerism. Metamerism is a phenomenon that occurs when two colors appear to match under one lighting condition, but not when the light changes. Metameric matches are quite common, especially in near neutral colors like grays, whites, and dark colors like these. As colors become lighter or more saturated, the range of possible metameric ...

No matter what you’re manufacturing, taking spectral measurements will help ensure your color remains accurate and consistent throughout your production run. When choosing the best spectro for your needs, your first consideration should be the type of surface you’ll be measuring. Measuring reflective surfaces poses a challenge because the effect of gloss can actually change the color appearance of a sample. The surface reflection of light is what causes the gloss effec...

Today is Earth Day. You know the buzz phrase – Reduce, Reuse, Recycle – but do you know what it means for your manufacturing process? Designed by Freepik Here are the top three places in a color workflow that can sabotage a company’s sustainability efforts. Not monitoring color throughout production, which leads to expensive rework and wasted raw materials. Incorrect colorant formulation. Are you using too much? Are you wasting the leftovers? Sending color samples back and forth and long approv...

Physical standards are one of the most precise ways to communicate color in many industries, including textiles, print, automotive, paints, food, chemicals, packaging, and plastics. Many brand owners and designers communicate color expectations using physical standards, and suppliers and manufacturers rely on them to capture spectral data for formulation. While physical standards can be a great help, they can also hurt business if they’re not cared for properly. Today we’ll look at five tips to...

Which of these swatches would you call bright red? PANTONE FASHION, HOME + INTERIORS Color Specifier pages Speaking the language of color isn’t like giving someone your phone number and expecting they’ll remember it. Our minds just don’t process color like that. While vague color descriptions are sufficient for many people – “Turn left at the blue house” or “choose the reddest strawberries” – if you work in an industry where color is important, you need to know how to speak a much more spe...

Green is green, right? Maybe if you’re celebrating St. Patrick’s Day, but not when your bottom line is impacted by color accuracy. In the color industry, a tolerance is the acceptable amount of difference between a standard (the color you’re trying to match) and a sample (the color you are producing). To determine whether a color is within tolerance, many manufacturers use a color measurement device called a spectrophotometer to measure both colors and compare the difference be...

If you work in an industry where color accuracy is important, you know that lighting plays a huge role in how you perceive color. A light booth is a crucial part of any visual evaluation program. It can help you verify whether the color of your product is acceptable, plus ensure it will remain accurate in every lighting condition after purchase. When parts are manufactured at different factories, a light booth should also be used to make sure they continue to match under any lighting condition o...

Pantone®, an X-Rite company, recently announced a pair of complementary shades as its 2016 Color of the Year:  PANTONE 15-3919 Serenity and PANTONE 13-1520 Rose Quartz. The PANTONE Color of the Year announcement is always exciting because it sets the stage for upcoming trends. The Color of the Year selection process is very thoughtful and a lot of consideration is given to the color choices. To arrive at the selection each year, Leatrice Eiseman, Executive Director of the Pantone Color Institut...

Using a spectrophotometer to measure color doesn’t necessarily mean you’re going to capture accurate data. The most common reason for incorrect measurements and inconsistent readings among instruments is using the wrong device settings. Today we’ll look at five things you must consider when setting up your device and taking measurements. Illuminant and Observer angle The illuminant describes the color of the light under which you’re judging colors. To accurately determine how the color will...

The trick to color success isn’t just selecting the right tools. You need to know how to use them. Even the most expensive spectrophotometer won’t be helpful if you don’t know which aperture size to choose during setup or which tolerancing model to follow. Since color workflows are specific to industry, products, and color needs, it’s not possible to establish one single process that works for everyone. That’s where X-Rite Color Experts come in. Whether you need hel...

As an Applications Engineer and Technical Support Specialist at X-Rite, I get a lot of calls from frustrated customers who don’t understand why they can’t get their color right. They’re tired of the trial and error, rework, and wasted materials that are impacting their bottom line and credibility with customers. They just want their color workflow to WORK and FLOW. Why is it so hard? Today we’ll walk through the top 8 reasons color control programs fail, so you can evalua...

What happens to products when color goes wrong? It’s wrong color that keeps discount stores in business. Copy paper that isn’t quite bright enough, a label with the wrong color red, or a pillowcase that’s a shade off from the rest of the sheets, and the product is rejected. A discounter can buy the whole lot for a fraction of the cost and sell it for profit. This, of course, is not good for manufacturers, and it is the real reason color control in manufacturing is so important. From color speci...

The spectral reflectance curve provided by a spectrophotometer is commonly known as the color’s “fingerprint”. Spectrophotometers are color measurement devices used to capture and evaluate color. As part of a color control program, brand owners and designers use them to specify and communicate color, and manufacturers use them to monitor color accuracy throughout production. Spectrophotometers can measure just about anything, including liquids, plastics, paper, metal and fabr...

Many companies spend a lot of time and money on color measurement instruments and software but forget about the importance of lighting when approving products for shipment. When used properly, spectrophotometers and color management software can tell you if your colors are within tolerance, and they can also manage gloss and metamerism (see explanation of metamerism below). However, you could still be sending out unsatisfactory parts if they don’t look right after they’re assembled, once they hi...

From laundry soap to paper to socks, it seems that manufacturers everywhere are trying to achieve the brightest whites, and consumers are certainly buying in. These companies use chemical dyes called OBAs to make their whites “whiter” and stay ahead of the competition. OBA stands for optical brightening agent. You may also have heard it called FWA (Fluorescent Whitening Agent), optical brightener, fluorescent dye, or even just whitener. An optical brightening agent is a special type of dye that ...

Whether you’re printing on press or replicating a brand’s colors on the web, PANTONE’s Color Systems are the gold standard for communicating color specification and quality control. They provide a common language for color so specifiers and manufacturers can be sure they understand the customer’s expectations and reproduce those colors, even if they’re a world away. The PANTONE PLUS SERIES COLOR BRIDGE Set provides process color simulations of all solid PANTONE Colors as a side-by-side compariso...

X-Rite manufactures and supports color measurement solutions for global markets where color and appearance matter. We build and service each product in an environment that adheres to the highest standards and strictest tolerances. Our lean manufacturing process, Six Sigma mentality, and ISO 9001 and 17025 certifications provide confidence that every device you receive from X-Rite will work exactly as designed. Today we’ll take a look at what you need to do to protect your investment, from regula...

Warm weather is just around the corner and spring is in the air!   Fluffy yellow chicks…   Delicate pink tulips…   Soft green sprouts poking through the ground…   And, of course, spring M&M'S®! Advertisers target our springtime emotions through pastel colors. Pastels have a calming effect, and everywhere you look companies are using them to feed our desire to feel a bit of spring. Today we’ll take a look at the psychology of color, how marke...

Color mistakes are expensive, and can happen anywhere in the process – during specification, formulation, manufacturing, assembly or – worst case – all of the above. Colors easily drift from raw materials to parts assembly and production – one loose screw in a projection molder and the color will shift. When productions and parts are created in various locations, things get further complicated. Who has time for rework? And who wants to explain the wasted time and materials? Every mistake is expensive. Adding mistakes to mistakes across the entire process is very expensive.

In addressing these issues, data is your friend. Measuring color, across the supply chain and during manufacturing and assembly is the only true way to ensure that color remains consistent. This is foundational to creating a color-managed workflow, and X-Rite’s new Ci7x00 series of benchtops sets a new benchmark for the industry. With up to five aperture sizes and three automated UV filters, the Ci7x00 devices can measure pretty much any surface, size and texture, including opaque, transparent and translucent, wet or dry, with or without gloss. Couple this with customer-friendly service and on-site maintenance for many issues, and you will be the color hero in your department.

So how do you know the color you measured is the color you want?