Why Backward Compatibility in Spectrophotometers Is Key to Consistent Color If you’re here, chances are you rely on a benchtop spectrophotometer to keep your color quality on point. From textiles and plastics to paint, coatings, and more, these high-precision instruments are critical to maintain consistency in your processes. At X-Rite, we engineer our spectrophotometers to perform reliably for years, even in the toughest environments. But no instrument lasts forever, and eventually, an ...

X-Rite Pantone is excited to exhibit at Fakuma. Like many of you, digitization and sustainability are top of mind. We invite you to stop by our booth to see how an end-to-end lifecycle that focuses on color can help you: Fulfill your customers’ color demands Ensure color consistency with varying batches of recycled raw material Accelerate material color and appearance approval Minimize color surprises at delivery Actively decrease your global footprint The Key t...

Looking for a centralized location to manage your X-Rite products and services? Check out My X-Rite. Whether you need product information or support, service details, or access to learning resources, our free online portal is just a few clicks away. 24/7 Access: Easily access your personal dashboard from your computer or mobile device around the clock. Personalized Dashboard: See what matters most to you in one convenient location. Effortless Service & Support: Submit and track...

A recent amendment to the EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment will remove the current exemption for mercury to be used in a number of types of fluorescent lamps for special purposes by 24th of February 2025. These bulbs are defined under clause 2(b)(4)-I of the EU REACH directive. After the expiration date, the sale of new equipment including fluorescent technology under this exemption will not be allowed in Europe. Th...

皆様の色の品質管理の工程には、目視評価が含まれていますか？ もしそうでないなら、含めた方が良いでしょう。 標準光源装置SpectraLight QCを目視評価ワークフローの一部として使用 どの業種でも、色の評価は、測色計でサンプルを測色するだけではありません。測色計は色を許容範囲内だと表示していても、その結果は必ず人間の目に正しく見えるとは限りません。 顧客からの拒否を最小限に抑えるには、色管理プロセスに照明ブースでの視覚評価を含める必要があります。特に、同じ製品の異なるパーツを生産する場合です。なぜなら、工場内だけでなく、屋外や蛍光灯のある店舗など、世の中にどこで見られても、色の統一感が必要だからです。 本日は、皆様の品質管理の工程を、可能な限りレベルアップするために、目視評価するための１０のヒントを紹介します。 目視評価に欠かせない標準光源装置を使用 エックスライト社製の標準光源装置SpectraLight QCは、さまざまな光源の下で色を評価・比較するための制御された環境を提供します。ここでは、標準光源装置の導入によって、色評価の工程を最大限に活用するための 10 のヒント...

This time of year, the internet is full of Top 10 Countdowns. It’s a tradition we’ve embraced since 1940 when the Billboard published its first chart ranking the top selling recorded songs. Since then, others have jumped on the bandwagon to highlight the most popular trends of the previous year.   We’ve been publishing our top-read blogs since 2016, and we’re happy to see some educational topics like color perception, tolerancing, and spectrophotometers continue to r...

It’s important to ensure design intent is realized each time and everywhere a product appears. But with so many variables to impact print quality, how can brands utilize suppliers around the world and still achieve consistent color? Our X-Rite Pantone Packaging Color Experts have designed a series of consulting services and workshops to help you get the most from your print, packaging, plastic or textile value chain.   Offered both online and onsite, these interactive sessions i...

With a focus on sustainability, Walmart continues to be a leader in color specification and control. Earlier this year, Walmart notified their apparel and home goods suppliers of a new certification program to combat wasted time and resources and decrease the global impact of a traditional color approval process. Since then, Walmart's Home business unit has seen many updates and enhancements to the color evaluation process to reduce processing time, shipping, and material costs. This has result...

なぜ分光測色計の校正が必要なのか？ 分光測色計は現在、ほとんど100%デジタル化されています。実際、電球以外、アナログ部品はほとんどありません。デジタルは、アナログと比べ、安定性が高いものの、 許容誤差が非常に小さくなっています。このような厳しいスペックに収まるため、定期的に分光測色計の校正を行う必要があります。 電球の安定性 分光測色計と電球を使用し続けると、性質が変わり始めます。分光測色計の校正は、 このような電球の光生性能を補正するためです。慎重に校正を行うことで、電球の寿命が尽きるまで、何か月、あるいは、何年も安定した測定が可能になります。 タイルとレンズの清浄度 装置内には、色空間における2つの既知ポイント、すなわち定義された白と黒の設定があります。工場では、白のキャリブレーションタイルを定義するため、完全な反射率曲線が作られ、さらにブラックトラップ内の黒点を定義するため、完全な反射率曲線が作られました。白と黒の正確な位置は、キャリブレーションのため、デバイス内に設置されました。 白いタイルが少し汚れると、白い点が横軸の黒に向かって下がります。白点だけでなく、その線上にあ...

色は大事だと、よく言われています。なぜ大事なのか知っていますか。実際、生産工程において、色はとても重要な要素です。しかし、残念ながら、多くのメーカーは、色を正しく表現することが以前と比べ、はるかに難しくなったと気づいています。なぜなら、取引先のブランドは、より厳しい許容範囲を満たすことを求めています。 その理由の一つは以下のとおりです。 メタリックパッケージ、真珠光沢仕上げ、カスタムファブリック、鮮やかな新色など、色技術の進捗は顧客を魅了する一方で、生産における一貫性を持たせることがより難しくなっています。 たとえば、コンポジットデッキを例としてあげましょう。以前はグレーかブラウンの2択しかありませんでした。そして、デッキ全体に調和が取れていけば、お客様は十分満足されました。しかし、今では、深い木目模様やエキゾチックな色など、多くの選択肢があります。そのため、メーカーは2～3色ではなく、数10色を管理しなければなりません。統一感を出すために、より難しくなりました。 パッケージもそのひとつです。かつて、印刷された箱のみが並んでいたお店でも、今はホイルパウチやブリスターパック、マルチ基...

When customers are just getting started with color management, they often ask, "What is the difference between a spectrometer and a spectrophotometer?". With such a minute spelling difference, it's easy to make a quick typo and get the wrong answer for this color question. So...what's the difference? Spectrometers vs. Spectrophotometers    What is a Spectrophotometer? A spectrophotometer is a color measurement device that is used to capture and evaluate color on just about anything, in...

In this series we’ve been discussing the many factors that impact how we see color, and what we can do to ensure the color we see is accurate. Light, retinal fatigue and background effects can influence our perception of color. Today we’ll look at the limitations of the human eye and brain, and talk about how to detect these characteristics, especially for individuals responsible for evaluating and judging color. Are YOU color deficient? Read on to find out. (Spoiler alert: There’s a test at the...

There are many things that affect our ability to see color. In some cases, it doesn’t matter if the red you see is the same shade I see. A barn is a barn, right? But for those who work in an industry where color evaluation is part of the job, it IS important… VERY important. In our color perception series, we’re discussing the many factors that affect how we see color and what colorists can do to ensure that the color they see is the color they are supposed to see. Today we’ll take a closer look...

As the temperature of light changes, so does our perception of color. As I mentioned in our last post, light plays a huge role in the way we perceive color. Today we’ll look at the science of color in manufacturing and photography; specifically how an object’s reflective and absorptive properties and viewing technology can impact the colors we perceive. To reflect or not to reflect… that is the question. The colors an object absorbs and reflects is determined by its material – is it metal, plas...

Benchtop spectrophotometers measure in transmission and/or reflectance mode to capture and quantify color on opaque, transparent, and translucent samples. Reflectance spectrophotometers measure color by flashing light onto the surface of the sample and measuring the percentage of spectral reflectance of different wavelengths at 10 nanometer increments. This blog explains how a spectral reflectance measurement works so you can determine if it will meet your color measurement and quality control ...

How many trial and error steps does it take you to formulate a color? If you answered more than three, it might be time to enlist the help of a computerized solution. Computer-aided color formulation can bring huge benefits to your business. Out of the gate, even beginners can hit color targets faster, saving time, money and expensive colorants. Once you have established an accurate method, you can expect to match 95% of your color formula requirements within a reasonable color distance on the f...

There are many things that affect what we see. Optical illusions aren’t just fascinating; they teach us about how we visually perceive our surroundings. In our Color Perception Series, we shared some of the factors that affect how we see color and the impact it has on manufacturing. In honor of April Fools' Day, we’re taking a closer look at some of the ways our brain, eyes, and the environment can influence what we see. April Fool #1: Your Brain Let’s start with the power of t...

Are your customers rejecting shipments due to incorrect color? Are you identifying color issues during quality control? If your bottom line depends on color accuracy, you need to ensure your spectrophotometer is not the cause. Color drift is a big issue for a lot of companies. Even worse, many don’t even know it’s happening. Here are some ways to make sure your spectrophotometer is operating within specification to always capture accurate and consistent measurement data. Causes of Sp...

Last week Pantone announced the Pantone Color of the Year 2020 - Very Peri (PANTONE 17-3938). The Pantone Color of the Year announcement isn’t just important for designers. Since this color will set the stage for upcoming trends, brand owners should also take notice to capitalize on this trending color. Bring Very Peri to Market, Fast. Is Virtual Design the Answer? The fashion and apparel industry began embracing virtual design years ago. Luxury brands like Louis Vuitton, Burberry, ...

Light booths provide a controlled environment for judging color under different lighting conditions. They can help visually evaluate how different types of light will affect the perception of color, evaluate the color of raw materials before and after production, and ensure different components will remain uniform once they’re assembled.   But not all light booths are the same. With NIST traceability and ISO 17025 accreditation, X-Rite offers worldwide competence in calibration, cert...

The best way to visualize how color will react in real world lighting conditions is to use a quality light booth. Traditional light booths contain common illuminants like daylight, incandescent, and fluorescent to replicate how color will look in the retail store and post-purchase in outdoor and home lighting. Today, the increased use of LED lamps in home, commercial, and retail environments is impacting decades of standardized lighting procedures.   How LED is Changing the Game LED li...

測色は、色の重要な作業において、色の品質を指定・定量化・伝達・定形化・検証するために必要です。色の感じ方は人それぞれ異なるため、測色は目視評価より正確な結果を得られます。  色測定とは？ 色測定は、サンプルによって放射・透過・反射される光の量をとらえ、スペクトルデータとして定量化することで、光源の変化分も捉えることが出来ます。測色計（分光測色計）で行う色測定は、目視評価より正確です。なぜなら、人間の色認識は差を表すのは得意ですが、定量的に示すことは不得意です。色に関わる重要な作業には、色を識別・定量化・伝達・区別するための分光測色計の導入を強く推奨します。 色波長の測定方法 色を測定するには、分光測色計と呼ばれる測色装置でサンプルに光を当て、人間の目に見える波長範囲である380nmから780nmの範囲で透過または反射した光の量をとらえます。分光測色計は波長範囲にわたるスペクトル波長測定に基づき、計算を行い、スペクトルデータを定量化します。  測色計とは？ 測色計には、色彩計と分光測色計の２種類あります。 色彩計は人間の目と同じように色を認識し、赤・緑・青を感じる3...

Learn about light, reflection curves, optical brighteners, and more.     Illuminants Electro magnetic radiation in the wavelength range from 380 nm to 730 nm is seen as light by our eyes. Low wavelengths show as blue light, then the spectrum continues from green to yellow, orange, and red. UV radiation is located in the range below 380 nm; the range above 730 nm is called infrared radiation. The visual impression of a colored body changes by the composition of the incoming light. ...

2020年、製造業界は仕事のやり方を見直さなければなりませんでした。 世界中でコロナウィルスの影響により、試作品を確認するための移動が制限され、現物サンプルの出荷が遅れました。 多くのメーカーは、生産を継続するためにデジタル・カラーサンプルを使用する方法を模索し始めましたが、 問題はカラーサンプルが正しい見え方を再現できないことでした。 デスクトップアプリケーションPANTORAは、この問題を解消します。 PANTORAを使えば、ユーザーは分光測色値を計測またはインポートし、バーチャル・マテリアルとして保存、管理、表示、編集、レンダリングすることができます。 また、PANTORAはこれらのバーチャル・サンプルをAppearance Exchange File (AxF)フォーマットにデジタル交換し、3Dレンダリングアプリケーションで使用することができます。 現在、PANTORAのレンダリングパートナーはRGBデータのみをサポートしています。 しかし、スペクトルを組み込むための機能が実装されるまでは、PANTORAを使ってスペクトル・データをRGBデータに変換することができます。 ここで...

COVID-19 has forced many companies to rethink the way they communicate, approve, and produce color.  For some, that means trying to conduct “business as usual” from a remote location. For others, it means finding ways to manage color without travel. Either way, we know our customers are doing everything they can to sustain business while keeping their employees healthy and safe. We want to help. Over the past few months we’ve been adding new resources to our virtual resou...

The Pantone Color of the Year announcement is always exciting. Not only does it set the stage for upcoming trends, it also provides brand owners and designers critical guidance for marketing and product development. However, those who are charged with manufacturing products and packaging with trending colors (like 2021's Ultimate Gray and Illuminating) know it doesn’t “just happen.” It takes time and effort to incorporate new colors. Whether you work in paints, plasti...

Black Friday. Not only is it the much anticipated start to holiday shopping, it’s also a day manufacturers have been preparing for all year long. Whether mass-producing holiday cards, candy canes, plastic toys, or festive clothing, accurate color is a must. Manufacturers can’t ship two of the same toy if they won’t match on the showroom floor, and holiday sweaters that are a shade off will end up at a discount store instead of a fashion boutique. Perfection is especially import...

To establish a successful quality control program, you need good instrumentation, robust software, and trained users. But even with everything in place, there are some common pitfalls to watch for when using a spectrophotometer to analyze color quality. Measuring plastic parts with the X-Rite Ci7800 benchtop spectrophotometer. Top Five Color Measurement Pitfalls  1. Bad Standards and Samples Physical standards and samples don’t last forever. Careless handling and dirty devices can ...

Whether you’re producing textiles, automotive parts, or plastic pieces, color needs to remain consistent or the final product will be rejected. Unfortunately, there are many ways for color errors to creep in during manufacturing. Creating and using accurate digital color standards is one way to combat these errors. Digital color standards can be used in software to specify and communicate color, formulate colorants and raw materials, and control color quality. They give brand owners peac...

As the industrial plastics market grows increasingly competitive and demands more sustainable practices, manufacturers need new ways to formulate and produce accurate color faster, with less waste. Digital color standards are one of the most effective tools to bridge this gap. They also enable color work and communication from remote locations.   With digital color standards, brands and designers can set clear expectations with supply chains. In turn, suppliers can achieve color goals wit...

Whether you work with plastics, coatings or textiles, you must consistently achieve in-tolerance color or your product could be rejected before it even makes it to the shelf or showroom.     This is especially true for brands that rely on off-site suppliers and manufacturers for raw materials and parts that come together at assembly, such as the plastic dashboard, fabric seats, and coated interior panels of a car. Even if each site produces in-tolerance color, it must be monitored an...

No matter the industry, our customers are all working toward the same goal: Achieve accurate color and keep production moving. Even in the best conditions, color data can be a challenge to capture and share. COVID-19-related travel bans and social distancing guidelines are making it harder than ever.    Today we’ll share three easy ways to remotely share color data so you can achieve your color goals without shipping physical samples or making onsite visits. The Benefits of Digit...

Our customers who are now working remotely need to be aware that changing a small variable – such as approving color from home under a different light source, or emailing specifications instead of sending a physical sample – can introduce color issues that risk creating a larger color problem. The first and most critical stage to color control is accurate color communication. These resources will help you get started. The Importance of Color Communication Blog | Many color...

Spectrophotometers (“spectros” for short) are color measurement devices used to capture and evaluate color. As part of a color control program, brand owners and designers use them to specify and communicate color, and manufacturers use them to monitor color accuracy throughout production. Spectrophotometers can measure just about anything, including liquids, plastics, paper, metal and fabrics, and help ensure that color remains consistent from conception to delivery.   &nb...

Phone and computer screens are the window into the digital world of color, but if you are approving colors via email or text you need to be aware of the limitations.  For starters, each of your devices relies on a different color model to display color. Input devices – your camera and monitor – use the additive color model to display color. They start with darkness and add red, green, and blue light to create a spectrum of colors. Printers, on the other hand, use the s...

Does your quality control program include visual evaluation? Lighting plays a huge role in how we perceive color. It can help you verify whether the color of your product is acceptable and ensure it remains accurate in every possible lighting condition after purchase.     Many of our customers are finding visual evaluation to be even more important as they transition color reviews and approvals to a different location, such as in the home office or to another remote environmen...

So much goes into the way you perceive color, including light, genetics, the environment, human traits, and even fatigue. You may also be among the 1 in 255 women and 1 in 12 men who have some form of color vision deficiency. Our online color challenge is a fun way to better understand your color vision acuity.     Regardless of your color vision acuity, if you are communicating, evaluating, or approving color from a new location your eyes may trick you into making diff...

Color has always been a critical factor for our customers. Due to the COVID-19 pandemic, many are now trying to design, specify, communicate and ultimately achieve accurate color from remote locations or with less staff and fewer resources. Are you having trouble maintaining your color program in this unprecedented time?  We've compiled our most popular resources – blogs, videos, whitepapers, webinars, and case studies – to help you connect with your supply chain and ...

Appearance is more than just color. It’s an all-inclusive look at everything inherent to an object, including texture, gloss, transparency, translucency, and special effects like sparkle and shimmer. When viewed from different angles or under different lighting conditions, appearance effects can change our perception of color. That's why it’s important to control both color and appearance throughout design and development.  Durable goods brands use appearance effects to captur...

Managing color throughout production is always a challenge, but advances in color technology, like the metallic, shimmer, and pearlescence effects designed to capture consumer attention, are taking the frustration to a whole new level for quality control managers. This is especially true when producing parts that must match at assembly, such as the metal panels for a home appliance or the painted side mirrors for a vehicle.  Special effects are tricky to control because our perception can c...

色の見え方を言えば、私たちの目は騙されることが多くあります。原因としては、私達の脳が膨大な情報の量を管理し、最善の方法で処理することです。また、遺伝や環境等の影響もあります。そのため、私達は誰でも少しずつ違った色を感じています。しかし、私達が見る色に何よりも、最も大きな影響を与えるのは光です。   ここでは、光が色の知覚に与える影響について、わかりやすくご紹介します。 RGB 色度図 光の色温度 虹色（ROYGBIV）と呼ばれる可視光線のスペクトルは、約380〜720ナノメートルの光の波長を含み、赤、緑、青の3原色に分解することもできます。この3原色を様々な組み合わせで混ぜることで、何百万色もの美しい色を作り出すことができます。加法混色の場合、同じ量の光を混ぜると、その色が白として認識されます。     これが加法混色の基礎です。   白は色がないのではない 奇妙に聞こえるかもしれませんが、物体そのもの自体には色がありません。どの波長の光を吸収し、どの波長の光を反射するかという性質を持っています。その反射光が人間の目に入り、色として認識されます...

Durable goods and consumer electronics are no longer destined to be white, gray, and black. In fact, consumers are moving towards more classic colors and special effect finishes like metallics. To capitalize on this trend, brands need to bring innovative designs in new colors faster to market than ever before.   One trending color, the PANTONE Color of the Year 2020, is sure to capture the attention of durable good and consumer electronic brands. It is a simple, timeless, elegant, and endur...

紙、テキスタイル、プラスチック、コイルコーティング、ガラス業界など、インライン測色の意味を解説 エックスライトのインライン測色ソリューションを使用すると、さまざまな業界のメーカーは、生産全体を通じ、色の正確性と一貫性を評価でき、ISOのコンプライアンスを追跡できるようになります。インラインシステムは、製品の製造中にリアルタイムで色を監視し、製品が仕様外に逸脱し始めた場合に、オペレータに警告を出し、製品が無駄になる前に修正を行うことができます。 トラバースビームに取り付けられた非接触式インライン分光測色計ERX145はシートの左側、中央、右側を自動的に測定します。 エックスライトのインライン測色ソリューションは非接触分光測色計とESWinソフトウェアを使用しています。多くの装置は、スタンドアロンのラボユニットとしても機能しますが、システムには分光測色計をラインに設置するための移動フレームとロボットアームが含まれることがあります。用途やニーズに応じて、エックスライトのインライン測色ソリューションはプロセスコントロールシステムと連携し、リアルタイムのクローズドループの色補正を実現する...

Do you get a different feeling in a room full of warm, natural colors…  …than you do in a white and sterile office?  Has a building ever “spoken” to you? Color is an Integral Part of our World It's a visual language that everyone understands; a sensory perception that affects our emotions in many ways. Although it is often subconscious, the impact of color plays a fundamental role for interior and exterior architectural paints and coatings elements. ...

現在のような測定器が現れるまで、カラーは主に人間の眼（ご存知の通り不安定）を基準として調整・操作されていたため、色の合わせ込みは一部の人以外には非常に難易度が高いものでした。 測定器の登場はカラーマネジメントの技術を可能にし、デバイス間の色を近づけることを可能にしました。 色を測る測定器には大きく分けて次の２つの種類があります。色彩計（Colorimeter）と分光測色計（Spectrophotometer）です。 色彩計と分光測色計は、色を測定するための装置です。段ボール包装から食品、洗濯石鹸、カーペット、プラスチック部品に至るまで、最初に指定された色と一致するか、確認できます。プラスチック、テキスタイル、塗料、コーティング、印刷、パッケージ印刷など、色が重要なあらゆる業界で使用されます。 1. 色彩計の原理 色彩計は、人間が色を知覚する方法を模倣します。色彩計の原理は以下のとおりです。 色彩計は三刺激値を測定する機器です。人の目の感度に合ったレッド、グリーン、ブルーのフィルターを使用することによって、光や色に対する人間の目の反応に応じた値を得ることができます。いくつかのアプ...

Inter-instrument agreement is a very important consideration when selecting color measurement devices for your workflow. Unfortunately, it’s such a technical topic that it leads to a lot of confusion about what it means and why it’s important. The Ci7860 sphere benchtop spectrophotomter is has an inter-instrument agreement specification of 0.06 average Delta E*, enabling brands to create the most precise master color standards. Today we’re making it as simple as possibl...

Although plastics professionals have been managing color issues in the production workflow for many years, the dynamics are once again changing. From consumer electronics to automotive parts and flexible packaging, a growing number of brands are incorporating special effect finishes into their products. While metallics, pearlescents, and other complex finishes are beautiful and help brands stand out on the shelf, they also introduce new color management challenges into the manufacturing pro...

Controlling color on cylindrical-shaped items like cups, cans, and tubes is a challenge because it’s hard to properly align the measurement device with the sample. Many printers and manufacturers cut a piece from the finished product and lay it flat to take a measurement. While this method works, each sample takes time to cut, wastes product, and risks the safety of the employees who are cutting the samples.  A Faster, Safer Solution X-Rite’s Cup and Cylinder Fixture works ...

With so many requests for innovative bases, transparency, and special effects, formulating color for paint, coating, and plastic applications can be a challenge. To keep up, formulation software needs to be innovative, too. We recently launched version 10 of our Color iMatch formulation software, and it is our smartest version yet. It allows you to select cost-reducing parameters, such as lowest cost or fewest colorants, and will determine the best formula for your application. It work...

Are you wasting too much time and money on incorrect color? Even if you use the best color measurement tools available, your color will still fail without quality control. Quality control (QC) means verifying the color you specify is the same color you manufacture, throughout production. Setting up a QC program can help you accurately communicate color with clients and suppliers, inspect raw materials before you begin working, and verify your color is correct before you ship.   Five Impor...

As we move through spring and into summer, we’re revisiting Pantone Color Institute’s Spring/Summer 2019 Fashion Color Trend Report. This season’s report features the top 12 stand out colors as well as current takes on four classic neutrals.    Images extracted with permission from PANTONEVIEW Colour Planner Spring/Summer 2019.    According to Leatrice Eiseman, Executive Director of the Pantone Color Institute, “This new mindset underscores a...

Your customer rejected your latest shipment due to color.  You checked the color before you sent it and it passed tolerance…  You did everything the same way last time and it passed tolerance…  So why did it get rejected now? We get this question from our customers all the time.  The Dreaded “Error Stack” Color rejections create waste and increase production costs. Unfortunately, there are a lot of variables that contribute to the color you produce,...

ベンチトップ分光測色計は、ガラス、液体、繊維など、さまざまな不透明、透明のサンプルの色を透過または反射モードで測定・定量化することができます。本記事では、透過測定と反射測定の違いを説明し、どのベンチトップ分光測色計を選ぶと良いか、ご説明します。 透過測定と反射測定 透過測定と反射測定が可能な分光測色計は、フラッシュを照射し、透過または反射された光を測定し、360～750nmの間のすべての光の波長の分光透過率または分光反射率を作成します。反射して戻ってくる主波長がその色を示します。青紫、藍、そして青は、波長が短く、400～550nm。緑はその中間で、550～600nm。黄、オレンジ、赤は最も長い波長を示します。OBAと蛍光剤含む場合は、100%以上のピークに達します。 反射測定の分光測色計は、サンプルの表面に光を照射し、10ナノメートル単位で反射率を測定することで色を測定します。完全に不透明な表面を測定する場合、反射測定の分光測色計で十分です。 一方、透過測定の分光測色計は、サンプルを通して光を投影できます。反対側にある検出器は、透過した光の波長と量をとらえ、平均透過率も数値化できま...

For the last few Decembers, we’ve provided you with a list of “top color measurement blogs” for that respective year. As we reviewed this year’s list, we noticed that your favorite/ the most-read blogs could be categorized into a few buckets. So, without further ado, here’s 2018’s top blog topics!  2018’s Most Popular Color Measurement Topic: Tolerancing Not to our team’s surprise, Tolerancing – what it is/what it means for your busines...

The Gabriel-Chemie Group, a leading masterbatch manufacturer in Europe, has partnered with X-Rite Pantone to provide their customers with an innovative solution to improve daily color requests, expanding their existing product portfolio to include solutions that keep pace with the move towards digitization and industry 4.0. The Challenge As a leader in masterbatch manufacturing, Gabriel-Chemie is always looking for ways to sharpen their customers’ experiences and solve production challenge...

Each year, Pantone announces its highly anticipated “Color of the Year”. The selection is intended to serve as a strategic direction for design and color-conscious industries as well as a conversation piece around our culture, where it is going and what we collectively need…and it certainly gets everyone talking about color!  Color is no longer just something we see and appreciate - it enhances and influences the way we experience life. Color, as a strategic element of d...

Like geographic coordinates – longitude, latitude, and altitude – L*a*b* color values give us a way to locate and communicate colors. What’s the history of L*a*b*? In the 1940’s, Richard Hunter introduced a tri-stimulus model, Lab, which is scaled to achieve near uniform spacing of perceived color differences. While Hunter’s Lab was adopted as the de facto model for plotting absolute color coordinates and differences between colors, it was never formally accepted as...

If you’re measuring wet and dry paints, plastics, cosmetics, or small and odd-shaped samples, you’ll want to take a look at our new MetaVue VS3200 non-contact imaging spectrophotometer. It’s the perfect choice for industrial applications in coatings, plastics, food, cosmetics and more. Today we’ll demonstrate the power of its smart spot and on-screen targeting features and explain how it can integrate seamlessly with your formulation, quality control, and performance opt...

Warm weather is just around the corner and spring is in the air!   Fluffy yellow chicks…   Delicate pink tulips…   Soft green sprouts poking through the ground…   And, of course, spring M&M'S®! Advertisers target our springtime emotions through pastel colors. Pastels have a calming effect, and everywhere you look companies are using them to feed our desire to feel a bit of spring. Today we’ll take a look at the psychology of color, how marke...

The two most common spectrophotometers are the 0:45 and the sphere (aka diffuse/8°). We get a lot of questions about which is the best choice. Here’s the difference in how these two devices measure color, and guidelines for when to use each. 0:45 In a “fixed geometry” or “single angle” device, the first number is the starting point of the light, and the second number is where the light ends up after the reflection off the surface of the sample. In a 0:45 ...

Using a light booth to visually judge color is a great start to a successful color evaluation program. It allows you predict how color will look under multiple light sources so there won’t be any color surprises when the light changes over the life of the product. Introducing a color measurement device to capture spectral data is the next logical step. For a really great color program, you need to use both a light booth AND a spectrophotometer. This dynamic duo offers benefits you can&rsqu...

Recently we blogged about how appearance affects color. In this article we look at some of the characteristics that impact an object’s appearance, such as texture, gloss, transparency, and special effects, and explain why it’s crucial to describe appearance in the early stages of the design workflow.  While 3D programs have attempted to address appearance aspects for years, there has been a missing link in virtual product design: the ability to integrate characteristically &ldqu...

新車、消費者向けエレクトロニクスや電化製品を購入する際、製品色は品質にも影響する重要な要素です。例えば、製品の前と後ろの色が違っていれば、品質自体も疑われることでしょう。そのような心配は、正確な測色により解決します。 今日の競合市場において、メーカーは常にスキルアップを目指し、特殊効果のある仕上げを用いて製品の差別化を行っています。一方、特殊効果のある仕上げを特徴付けたり、隣接するパーツ部品と一貫性を保つためには、測色だけでは不十分であることが認識されています。 自動車産業では新車の約70%がパール系、シラリックなどのエフェクト顔料を特殊効果の仕上げに採用しています。これらのマテリアルの特性を正確に把握するためには、単なる測色だけでは不十分です。バンパーや車体パネルなど、隣接するパーツとの一貫性も確保することが必要となります。 色彩、粒子輝度感、粒子感を特徴付ける新しい MA-T 多角度分光測色計シリーズは、特殊効果のある仕様をグローバルで設定、共有、確保します。 MA-T へのアップグレード MA-T シリーズの多角度分光測色計は、特殊効果のある色材管理の指標設定を行...

Appearance is more than simply color. It’s a comprehensive look at everything inherent to each unique material we come in contact with, including texture, gloss, transparency, and special effects. Each of these characteristics plays a part and has an effect on overall appearance and understanding in relation to a single material. Objects may have several elements that affect appearance, such as the material’s surface texture, construction, overall geometry and micro-surface. The environ...

Color is our perception of reflected light across the visible spectrum. When light hits an object, it absorbs some rays and reflect others. The color of light that reflects back into our eyes is the color we perceive. The more light an object absorbs, the darker it appears. With black, very little light is reflected. Pure black in the presence of light wasn’t achieved until 2014 when Surrey NanoSystems announced the invention of Vantablack. This high-tech artificial substance absorbs 99....

We frequently get calls from customers who can’t figure out why their measurements vary, even when they’re using maintained devices. Why would a sample read one way one day, then slightly different another? Many times the culprit is thermochromaticity, and it becomes an even bigger problem as the seasons change. Every kind of material changes color with temperature. These changes cause the material to exhibit a shift in reflected wavelengths of light, which can alter our perception....

Have you ever sent out a job that passed your inspection, only to have the customer reject it for out-of-tolerance color? You recheck the data and the instrument says the color passed the agreed tolerance… why is the customer saying it doesn’t? We get a LOT of these conflicting measurement calls in technical support. The solution is simple – document a color control program that clearly defines how to assess color, then make sure everyone (including your customer) follow...

If you’re reluctant to buy clothing and home decorating products online or in the store because you’re not sure how the color will look when you get home, you’ll love X-Rite’s newest color-matching solution. Color-Eye® uses a calibration card and smartphone app to help consumers shop for items that match or complement things they already have at home, like a paint color that looks great with the curtains, a handbag and shoes that coordinate with a special occasion dress, or a jacket that will ma...

If you recently invested in a spectrophotometer or colorimeter, you know there’s a lot more to learn about color measurement than just how to use your new device. To help you begin exploring the exciting world of color, we’ve compiled seven blogs that explain how to set up your color measurement device, care for it, and use it to its maximum potential. 5 Tips for Setting Up Your Spectrophotometer Using a spectrophotometer (“spectro” for short) to measure color doesn...

Did you read our blog: Are You Using The Right Tolerancing Method? If not, check it out. Today we’re taking the topic one step further to investigate how tolerances are chosen in different industries. A pass-fail tolerance is the amount of color variation that is considered commercially acceptable. In part, tolerances are driven by customer expectations. While color tolerances are very tight in the automotive, plastics, and paint & coatings worlds, they can be much less strict in other...

Consistent color is a journey. A few weeks ago I blogged about the most common pitfalls people run into when starting a color program… Wrong lighting Less-than-perfect color vision Inaccurate physical standards Inconsistent device color measurement …And introduced some inexpensive color tools to help overcome them.   But the journey doesn’t stop there. Even if you’ve been successfully managing color for years, advances in inks, dyes, and substrates are introducing new challen...

At X-Rite Pantone, we pride ourselves on our ability to help customers specify, communicate, formulate, and produce consistent color. You’re probably familiar with our major markets, like plastics, industrial coatings, and print & packaging. You may also be aware of the more “common” things we measure, like paint, printed surfaces, and textiles. But, as you look for the emergency exit on a plane, watch a butterfly float by, or choose the freshest package of cheese from the ...

At X-Rite Pantone, we love color, and we’re passionate about helping you get yours right. That’s why we offer a full-service training program, staffed with Color Experts from many of the industries we serve. From beginner to advanced, lowest investment to highest return, we offer a variety of options to teach you everything you need to know to be successful. Are you new to color, wondering where it fits in your business objectives? Do you already have a color workflow, but ...

As we close out 2016, it’s time to look ahead to 2017 and the upcoming manufacturing trends that will influence how we do business in the New Year. With rapidly changing technology, it’s difficult to know exactly what’s coming next, but we can definitely make some predictions. Over the past year, I have interviewed many customers across a variety of manufacturing industries to learn more about their industry concerns, the design and manufacturing challenges they face, and the t...

Our color measurement devices are used by designers, brand owners, formulators, printers, and manufacturers around the world. Ranging from portable handheld devices, to large benchtop instruments, to spectrophotometers mounted inline, they can measure just about anything to help formulate and maintain a perfect color match. Many of our customers, especially those in the paint industry, are asked to color match some pretty interesting things, and we love to hear about them. We recently asked 40 p...

Our society loves customizing its surroundings. Personalized merchandise preserves memories, and when given as a gift, shows the recipient that you put a lot of thought into the choice. It also creates an emotional bond, and (if done right) encourages brand loyalty.  Image courtesy zazzle.com While the personalized merchandise market used to be dominated by photo books and calendars, advances in technology have opened the door to personalizing a wide range of materials like wood, ceramics,...

It’s the most wonderful time of the year! A time to reminisce… to celebrate our successes, and to explore areas that may need a little more attention in 2017. If color accuracy is on your list of things to improve, this article is for you. We’ve compiled a list of the blogs our readers found most helpful and interesting in 2016, so you can start working toward your goal of more accurate color in the New Year. Did your favorite blog make the list? Top 10 X-Rite Blogs of 2016 ...

When judging color, background can be a major distraction for the human eye. In fact, surrounding colors and patterns can actually change the perception of the color you’re trying to focus on. One of the wonderful things about color measurement instruments like colorimeters and spectrophotometers is that they can’t be distracted. They aren’t susceptible to variables such as fatigue, age or color vision deficiency. They aren’t even aware that a surround exists – they...

K 2016 begins today in Düsseldorf and runs through October 26th. As the #1 trade fair for the plastics and rubber industries, it’s a huge event featuring industry news, product demos, and networking. We’ll be in Hall 8b / Stand H65 showcasing our end-to-end X-Rite Pantone workflow solutions to help rubber manufacturers, compounders, masterbatchers, and converters get consistent color in a plastics workflow. Don’t miss your chance to speak with our color experts! (Here...

In color production, mistakes can happen anytime, anywhere… during specification, formulation, manufacturing, assembly, quality control, or (unfortunately) all of the above. Every mistake adds up to wasted time and materials, and stacking errors across a production workflow can get expensive very quickly. How can you stop this error stack from happening? If your job requires you to get color right, spectral data should be your best friend. One of our favorite eLearning courses to help customers...